基于双谱滤波的综合脉冲星时算法研究          下载免费PDF全文

周庆勇  魏子卿  张华  刘思伟  孙鹏飞  张奋  姜坤  刘晓刚  李奎 《天文学报》2021,62(2):19-95

毫秒脉冲星的自转频率非常稳定,提供了一种独立的基于遥远自然天体并能持续数百万乃至数十亿年的时间基准,具有稳定性强、运行时间长、服务范围广等特点.为了减弱毫秒脉冲星计时观测中各种高斯噪声对脉冲星时的影响,研究了一种基于双谱滤波的综合脉冲星时构建算法,处理分析了国际脉冲星计时阵(International Pul-sar Timing Array,IPTA)最新发布的4颗毫秒脉冲星(PSR J0437-4715、J0613-0200、J1713+0747和J1909-3744)的观测数据,分析了不同时间尺度综合脉冲星时的稳定性,并与构成国际原子时(International Atomic Time,TAI)的4家授时单位原子钟稳定性进行了比较.结果表明:双谱滤波算法能够较好地抑制观测噪声,提高综合脉冲星时的稳定性.相比于经典加权算法,综合脉冲星时1 yr、10 yr稳定度从7.77×10^-14、8.56×10^-16分别提高到1.50×10^-14、3.50×10^-16,单脉冲星时稳定性的提升也类似.同时发现,综合脉冲星时稳定性在5 yr及以上时间尺度上优于原子钟稳定性,可用于改善当前原子时的长期稳定性.  相似文献   

The Natural Resource Management Planning Portal: Perspectives for NRM Planning and Reporting     

Birgita D. Hansen  Peter G. Dahlhaus  Robert G. Milne  Andrew D. MacLeod  Chris Pitfield 《社会与自然资源》2019,32(6):709-719

Natural Resource Management (NRM) is often conducted as a partnership between government and citizens. In Australia, government agencies formulate policy and fund implementation that may be delivered on-ground by community groups (such as Landcare). Since the late 1980s, over AUS$8b of Commonwealth investment has been made in NRM. However, quantitative evidence of environmental improvements is lacking. The NRM Planning Portal has been developed to (1) provide an online spatial information system for sharing Landcare and agency data; and (2) to facilitate NRM priority setting at local and regional planning scales. While the project successfully federates Landcare NRM activity data, challenges included (1) unstructured, non-standardized data, meaning that quantitative reporting against strategic objectives is not currently possible, and (2) a lack of common understanding about the value proposition for adopting the portal approach. Demonstrating the benefit of technology adoption is a key lesson for digital NRM planning.  相似文献   

Water quality data for Fall Creek,New York,USA: 1972–1995     

David R. Bouldin  Niamh O'Leary 《水文研究》2021,35(1):e13968

The 33 086 ha mixed land use Fall Creek watershed in upstate New York is part of the Great Lakes drainage system. Results from more than 3500 water samples are available in a data set that compiles flow data and measurements of various water quality analytes collected between 1972 and 1995 in all seasons and under all flow regimes in Fall Creek and its tributaries. Data is freely accessible at https://ecommons.cornell.edu/handle/1813/8148 and includes measurements of suspended solids, pH, alkalinity, calcium, magnesium, potassium, sodium, chloride, nitrate nitrogen (NO3-N), sulphate sulphur (SO4-S), phosphorus (P) fractions molybdate reactive P (MRP) and total dissolved P (TDP), percent P in sediment, and ammonium nitrogen (NH4-N). Methods, sub-watershed areas, and coordinates for sampling sites are also included. The work represented in this data set has made important scientific contributions to understanding of hydrological and biogeochemical processes that influence loading in mixed use watersheds and that have an impact on algal productivity in receiving water bodies. In addition, the work has been foundational for important regulatory and management decisions in the region.  相似文献   

北京城市绿化的时空动态分析     

胡云锋  赵冠华  张云芝 《地球信息科学学报》2018,20(3):332-339

城市绿化覆盖是城市生态系统的重要组成部分,合理的绿化率和绿化布局可以改善城市环境,提高城市人居适宜性。研究中将2005、2010、2015年北京市土地利用（LUC）数据中的城市居民用地作为城区范围,应用Landsat 5、GF-1影像数据和MODIS产品,利用支持向量机的监督分类方法,提取了2005、2010、2015年的北京市城市绿化覆盖数据,并获取了同期的植被指数（NDVI）数据;继而以城市绿化覆盖率、绿化覆盖均匀度和植被指数为评价指标,在公里栅格和行政区2个尺度上探讨了北京市城市绿化覆盖的空间分布格局和时间变化动态特征。研究表明：① 3个指标在空间和时间2个维度、区县和栅格2个尺度上都表现一致。这反映北京市过去10年中,在绿化面积增加的同时,绿化的空间布局得到优化改善,绿化的质量得到提高。② 2005-2015年,北京市城市绿化覆盖面积由518.93 km² 增加到1405.54 km²,绿化覆盖率由39.9%增加到49.13%,绿化覆盖均匀度由0.598增加到0.653,植被指数由0.42增加至0.5。③ 北京市城市绿化建设存在明显的时空差异。中心城区绿化建设缓慢,成效不明显;重大绿化建设成果主要集中在城市边缘地区和远郊区县。城市绿化改善过程主要发生在2005-2010年。  相似文献   

A New Retracking Technique for Brown Peaky Altimetric Waveforms     

Fukai Peng 《Marine Geodesy》2018,41(2):99-125

A new Brown-Peaky (BP) retracker has been developed for peaky waveforms that usually appear within ～10 km to the coastline. The main feature of the BP is that it fits peaky waveforms using the Brown model without introducing a peak function. The retracking strategy first detects the peak location and width of a waveform using an adaptive peak detection method, and then estimates retracking parameters using a weighted least squares (WLS) estimator. The WLS assigns a downsized weight to corrupted waveform gates, but an equal weight to other normal waveform gates. The BP retracker has been applied to 4-year Jason-1 waveform (2002–2006) in two Australian coastal zones. The results retracked by BP, MLE4 and ALES retrackers have been validated against tide-gauge observations located at Burnie, Lorne and Broome. The comparison results show that three retrackers have similar performance over open oceans with the correlation coefficient (～0.7) and RMSE (～13 cm) between altimetric and tide-gauge sea levels for distance >7 km offshore. The main improvement of BP retracker occurs for distance ≤7 km to the coastline, where validation results indicate that data retracked by BP are more accurate (15–21 cm) than those by ALES (16–24 cm) and MLE4 (19–37 cm).  相似文献   

A-FPN算法及其在遥感图像船舶检测中的应用     

于野  艾华  贺小军  于树海  钟兴  朱瑞飞 《遥感学报》2020,24(2):107-115

光学遥感图像船舶检测主要面临两个挑战:光学遥感图像背景复杂,船舶检测易受海浪、云雾及陆地建筑等多方面干扰;遥感图像分辨率低,船舶目标小,对于其分类与定位带来很大困难;针对上述问题,在FPN的基础上,提出一种融入显著性特征的卷积神经网络模型A-FPN (Attention-Based Feature Pyramid Networks)。首先,利用卷积提取图像特征金字塔;然后,利用顶层金字塔逐级构建显著特征层,抑制背景信息,通过金字塔顶层的细粒度特征提高浅层特征的表达能力,构建自上而下的多级显著特征映射结构;最后利用Softmax分类器进行多层级船舶检测。A-FPN模型利用显著性机制引导不同感受下的特征进行融合,提高了模型的分辨能力,对遥感图像处理领域具有重要应用价值。实验阶段,利用公开的遥感目标检测数据集NWPU VHR-10中的船舶样本进行测试,准确率为92.8%,表明A-FPN模型适用于遥感图像船舶检测。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

鄂尔多斯地块周缘垂直形变场负位错反演与应变积累研究     

张希  刘立炜  郝明  白卓立 《大地测量与地球动力学》2019,39(6):551-556

利用鄂尔多斯地块及其周缘1970～2014年的垂直形变速率场资料，借助负位错反演研究该区域长期应变积累。结果表明，地块东北缘山西断陷带中北段年均能量积累增量、剪应力强度都较高，西南缘六盘山断裂与渭河断裂西段次之；山西断陷带中南段至晋陕交界处年均剪应力强度较高且显示一定程度的能量积累；西秦岭构造区尤其西秦岭北缘断裂西段、晋冀蒙交界区也反映一定程度的能量积累特性。  相似文献   

南极中山站全天信息采集系统     

王宇  辛玉新  姜鹏  杨勇  伦宝利  王传军  余晓光  常亮  范玉峰 《天文研究与技术》2021,(2):272-282

南极高原拥有独特的天文观测优势,为了对南极中山站夜天文观测条件进行实测研究,中国科学院云南天文台专门研制了一套具有耐低温、自动除雪除霜等适应南极气候特征的全自动全天信息采集系统,该系统可以提供实时的全天云量、天光背景和全天图像,并将信息推送到网页实时显示。介绍了系统的研制及为适应南极气候进行的耐低温实验,统计分析了中山站2016~2017年的全天信息数据,结果显示,中山站2016和2017年的可观测时间为772.21 h和437.38 h,可观测夜数为93 d和51 d,天光背景最大真实值为22.05 Mag/arcsec 2,年平均气温为-10.6℃,最高气温19.1℃,最低气温为-44℃,2016年平均相对湿度为55.2%。  相似文献